logo
Harga yang bagus  on line

rincian produk

Rumah > Produk >
Tabung bersirip bergerigi
>
ASTM A335 P22 HFW Serrated Finned Tubes With Carbon Fins For Power Plant

ASTM A335 P22 HFW Serrated Finned Tubes With Carbon Fins For Power Plant

Nama merek: Yuhong
Nomor Model: ASTM A335 P22
MOQ: Bergantung
Harga: dapat dinegosiasikan
Rincian kemasan: Kotak Kayu Lapis Dengan Rangka Besi
Ketentuan Pembayaran: TT, LC
Informasi Rinci
Tempat asal:
Cina
Sertifikasi:
ABS, BV, DNV, CCS, LR
Produk:
Tabung Sirip atau Tabung Bersirip
Jenis tabung bersirip:
Tabung Sirip Spiral Bergerigi
Bahan tabung berseru bergerigi:
Tabung Dasar ASTM A335 P22 dan Sirip Garbon
Detail tabung berseru bergerigi:
OD 273mm dan WT 9,27mm, Persyaratan Klien
Detail sirip tabung berseri:
Ketebalan Sirip 1,5mm, Tinggi Sirip 38mm, Persyaratan Klien
Panjang tabung berseru bergerigi:
17070mm/pc, Persyaratan oleh Klien
Pengepakan tabung berseri:
Kotak Kayu Lapis Dengan Rangka Besi
Penggunaan Pipa Bersirip Bergerigi:
Untuk peralatan besar, Heat Exchanger/Boiler/Tungku/Kondensor/Evaporator, dll
Menyediakan kemampuan:
2000 ton/bulan
Deskripsi Produk

ASTM A335 P22 HFW Serrated Finned Tubes With Carbon Fins For Power Plant

 

Chemical Composition (%)

 

Grade C Mn P S Si Cr Mo Others
P22 0.05-0.15 0.30-0.60 0.025 0.025 0.50max 1.90-2.60 0.87-1.13 ...

 

Mechanical Properties

 

Grade Tensile Strength,min Yield Strength (0.2%Offset,min)
P22 60ksi (415 MPa) 30ksi (205 MPa)

 

ASTM A335 P22 HFW Serrated Finned Tubes With Carbon Fins For Power Plant 0

 

Features of ASTM A335 P22 Pipes

 

Outstanding Creep Resistance

 

Excellent Oxidation & Anti-Scaling Capacity

 

Hydrogen Attack & Sulfidation Resistance

 

Stable Thermal Conductivity & Low Thermal Fatigue

 

ASTM A335 is standard of seamless ferritic alloy-steel pipes with nominal wall and minimum wall thickness for high-temperature service. ASTM A335 P22 alloy steel pipes are essential components in high-temperature and high-pressure applications, particularly in power plants, refineries, and petrochemical industries.P22 exhibiting excellent long-term creep rupture strength at temperatures up to 565°C, it is suitable for waste heat boilers, superheaters, reheaters, and air-cooled condenser (ACC) manifolds under high-pressure superheated steam (10–16 MPa) in power plants.

 

Application in Power Plant

 

Ideal for equipment with clean flue gas / cooling air without heavy sulfur corrosion:


Combined-cycle HRSG evaporators, economizer sections, waste heat recovery coils
Air-cooled condensers (ACC) for thermal power plants (dry cooling island)
Low-temperature reheater loops, boiler flue gas heat exchangers
Steam auxiliary coolers, feedwater preheaters

 

In short, ASTM A335 P22 high-frequency resistance welded serrated finned tube with carbon steel fins, metallurgically bonded to enhance turbulent heat transfer, exhibiting excellent high-temperature creep resistance and steam oxidation resistance. It specifically designed for combined cycle waste heat boilers, air-cooled condensers, and waste heat recovery systems in thermal power plants, balancing high heat exchange efficiency with overall project cost.

 

ASTM A335 P22 HFW Serrated Finned Tubes With Carbon Fins For Power Plant 1

Penilaian & Ulasan

Peringkat Umum

4.0
Berdasarkan 50 ulasan untuk pemasok ini

Cuplikan Penilaian

Berikut ini adalah distribusi semua peringkat
5 bintang
0%
4 bintang
100%
3 bintang
0%
2 bintang
0%
1 bintang
0%

Semua Ulasan

A
Ahmed Al-Rashid
Kuwait Mar 3.2026
Tube ends were clean, dimensions consistent. Our crew didn't run into fit-up issues.
P
P*l
India Sep 16.2025
No leaks, no fin damage, performance consistent. Heat transfer hasn't dropped, so fouling doesn't seem to be a problem yet.
G
Godfrey
Uganda Aug 20.2025
For power plant boilers, especially in industrial settings like ours, these tubes work. Good heat transfer, holding up well.